The Eurovent Team continuously receives and applies feedback from its members to further develop and improve the services related to our online portal. The Eurovent Extranet has recently gained a new feature, which allows members to download the Eurovent meetings directly into their personal calendar.
Recommended action for the specification, purchase, installation, operation and maintenance of air filtration systems in critical healthcare appliances
Eurovent Middle East, as the region´s industry association for Heating, Ventilation, Air-Conditioning and Refrigeration (HVACR) equipment manufacturers, is encouraging healthcare facilities to carefully observe the following recommendations by the industry to reduce the risks related to the spread of airborne viruses through air filtration and ventilation systems and properly instruct all personnel involved in the specification, purchase, installation, operation and maintenance of such systems.
Eurovent Middle East, as the region´s industry association for Heating, Ventilation, Air-Conditioning and Refrigeration (HVACR) equipment manufacturers, is calling on healthcare facilities, building owners, operators and facility management providers to carefully observe the following recommendations by the industry to reduce the risks related to the spread of airborne viruses through ventilation and air-conditioning systems and support the government in its efforts to contain the outbreak.
In this technical paper, Mr Tobias Zimmer, VP – Product Management and International Standards at Camfil shares some insight on Comfort IAQ. Many factors are rather well known for their ability to create a good indoor air climate, but when it comes to airborne particles, there is no great deal of documentation to consult and set requirements. Nor are there much of other specific guidelines. The new, product-neutral and free online calculation tool “Comfort IAQ” helps to understand the mechanisms behind IAQ and gives a good indication on what would be the impact on indoor air quality (IAQ) due to air exchange, outdoor air environment, air filter selection and building envelope characteristics
On a monthly basis, the Eurovent Team compiles a global overview of the latest developments concerning new standardisation activities and technical regulations of relevance for the HVACR industry. Our Notifications allow members to be prepared for developments that can have an impact on them and their products.
From 2 to 5 October 2019, the Eurovent Association, Eurovent Middle East, and Eurovent Certita Certification are going to be at ISK-SODEX 2019 – one of the largest international exhibitions for HVACR, Pumps, Valves, Fittings, Water Treatment, and Insulation. Eurovent will be at your disposal for requests concerning legislation, standardisation, certification, and general industry developments.
On a monthly basis, the Eurovent Team compiles a global overview of the latest developments concerning new standardisation activities and technical regulations of relevance for the HVACR industry. Our Notifications allow members to be prepared for developments that can have an impact on them and their products.
The International Institute of Refrigeration (IIR) and the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) have developed common definitions for these five terms. IIR has endorsed them in February 2019, and its dissemination should lead to a universal adoption. In Europe, the new definitions should affect policy documents.
After eight conferences in Europe, the 9th International conference on Energy Efficiency in Domestic Appliances and Lighting (EEDAL) took place in Irvine, California, USA. EEDAL is becoming an international event and the 10th EEDAL conference will take place in China, co-organised with the China National Institute of Standardization.
On a monthly basis, the Eurovent Team compiles a global overview of the latest developments concerning new standardisation activities and technical regulations of relevance for the HVACR industry. Our Notifications allow members to be prepared for developments that can have an impact on them and their products.
